Back to 1998 Saab 900

1998 SAAB 900

2.3L I4FWDAUTOMATICgas
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $30 →
Repairs0Labor564Torque4864Fluid6DTC615Battery0Maintenance0Recalls3
C0077moderate severityChassis

Steering Position Sensor Range/Performance

on 1998 Saab 900 2.3L I4 · FWD

What this code means

The steering angle sensor output does not match expected values for current vehicle behavior.

Symptoms

  • Stability control light on
  • ESC activates incorrectly
  • Steering center point wrong after alignment
  • Lane keep assist malfunction

Common causes

  • Steering angle sensor not calibrated after alignment
  • Sensor internal fault
  • Clock spring partially damaged
  • Steering column mechanical issue

Diagnostic steps

  1. Perform steering angle sensor calibration
  2. Compare sensor reading to actual wheel position
  3. Check for clock spring codes
  4. Verify alignment was performed correctly
  5. Test sensor full-range travel lock to lock

Repair notes

Recalibrate steering angle sensor. Perform on a level surface with wheels straight.

Other Chassis codes on this vehicle

Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →