Free API
P1400low severityPowertrain

Fuel Tank Pressure Control Solenoid Low

on 2013-2018 Subaru Crosstrek 2.0L H4 · AWD

What this code means

The PCM has detected a low-signal condition in the fuel tank pressure control solenoid circuit. This solenoid is part of the EVAP system and controls fuel tank pressure during emissions testing.

Symptoms

  • Check Engine Light
  • EVAP system monitor incomplete
  • Failed emissions test
  • Possible fuel odor

Common causes

  • Faulty fuel tank pressure control solenoid
  • Wiring short to ground
  • Corroded solenoid connector
  • EVAP system blockage
  • PCM driver issue

Diagnostic steps

  1. Test solenoid resistance
  2. Check wiring for shorts to ground
  3. Inspect connector for corrosion
  4. Command solenoid with scan tool
  5. Smoke test EVAP system

Repair notes

Replace the fuel tank pressure control solenoid if it fails electrical testing.

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013-2018 Subaru Crosstrek repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Crosstrek — $99 →
Building an app?
Free API key: 10 requests/day, 100/month, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →