Free API
C1155high severityChassis

Longitudinal G Sensor Abnormal

on 1993-2001 Subaru Impreza 2.2L H4 · AWD

What this code means

The stability control system detected a fault in the longitudinal (forward-backward) G sensor. This is used mainly on AWD and hill-related stability functions.

Symptoms

  • VDC/stability control light on
  • ABS warning light on
  • Hill start assist may be disabled

Common causes

  • Faulty longitudinal G sensor
  • Loose sensor mounting
  • Wiring or connector fault
  • Lost calibration

Diagnostic steps

  1. Scan VDC system for codes
  2. Verify sensor is mounted securely
  3. Check sensor power and signal wiring
  4. Perform sensor calibration

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1993-2001 Subaru Impreza repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Impreza — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →