P0396moderate severityPowertrain
Camshaft Position Sensor B Circuit High (Bank 2)
on 1993-2001 Subaru Impreza 2.2L H4 · AWD
What this code means
The PCM sees an abnormally high signal from the camshaft position sensor on bank 2, sensor B. This can throw off valve timing readings and affect fuel and spark control.
Symptoms
- Check engine light on
- Rough or stalling engine
- Reduced power
Common causes
- Faulty camshaft position sensor
- Damaged wiring or connector
- Reluctor/tone ring damage
- Bad PCM
Diagnostic steps
- Scan and confirm code with freeze frame
- Inspect sensor wiring and connectors
- Check sensor signal with scope or meter
- Replace sensor and retest
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1