Free API
C1102moderate severityChassis

Power Supply Voltage High

on 2020 Subaru Legacy 2.5L H4 · AWD

What this code means

The ABS module sees system voltage above the acceptable range. Often linked to charging system overvoltage.

Symptoms

  • ABS warning light on
  • Intermittent ABS operation
  • Charging light may be on

Common causes

  • Faulty voltage regulator/alternator
  • Bad battery connection
  • Wiring fault to module
  • Failed ABS module

Diagnostic steps

  1. Measure battery/charging voltage
  2. Check alternator output
  3. Inspect ABS power supply wiring
  4. Repair charging system or wiring

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2020 Subaru Legacy repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Legacy — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →