C1141high severityChassis
Master Cylinder Pressure Sensor Abnormal
on 2020 Subaru Legacy 2.5L H4 · AWD
What this code means
The ABS module detected an out-of-range signal from the master cylinder brake pressure sensor. This sensor tells the system how hard the brakes are applied.
Symptoms
- ABS warning light on
- Stability control disabled
- Brake assist may not function
Common causes
- Faulty pressure sensor
- Wiring or connector fault
- Air in brake hydraulic system
- Faulty ABS control module
Diagnostic steps
- Retrieve ABS codes
- Check sensor wiring and connector
- Compare sensor reading to actual pressure
- Bleed brakes and retest
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic