Free API
C1198critical severityChassis

Abnormal Brake Fluid Level / Pressure Control

on 2020 Subaru Legacy 2.5L H4 · AWD

What this code means

The system detected an abnormal brake fluid level or fault in pressure control. No direct OBD P-code equivalent exists.

Symptoms

  • Brake warning light on
  • VDC/ABS light on
  • Reduced braking assist

Common causes

  • Low brake fluid level
  • Faulty fluid level switch
  • Pressure sensor fault
  • Wiring or connector issue

Diagnostic steps

  1. Check brake fluid level
  2. Test fluid level sensor
  3. Inspect pressure sensor signal
  4. Check wiring and connectors

Other Chassis codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2020 Subaru Legacy repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Legacy — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →