C0131moderate severityChassis

Brake Pad Wear Sensor Circuit Rear

on 1997 Subaru Outback 2.5L H4 · AWD

What this code means

The rear brake pad wear sensor indicates pads are worn or the circuit is faulty.

Symptoms

  • Brake pad warning light
  • Service message for rear brakes
  • Reduced braking from rear

Common causes

  • Rear brake pads at minimum thickness
  • Wear sensor wire damaged
  • Connector not reattached after service

Diagnostic steps

  1. Check rear brake pad thickness
  2. Inspect wear sensor wire
  3. Check sensor connector
  4. Measure pad thickness

Repair notes

Replace rear brake pads and wear sensors.

Other Chassis codes on this vehicle

⚠ STILL BEHIND THE PAYWALL
The 1997 Subaru Outback repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Outback — $99 →
Building an app?
Free API access to all this data — 50 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →