P1100moderate severityPowertrain
Starter Switch Circuit Malfunction
on 2002 Subaru Outback 2.5L H4 · AWD
What this code means
The PCM has detected a malfunction in the starter switch circuit. The signal from the ignition switch indicating a start request is not being received correctly by the PCM.
Symptoms
- Check Engine Light
- PCM may not recognize engine cranking state
- Fuel and ignition timing strategy may be incorrect during start
- Extended crank time
Common causes
- Faulty ignition switch
- Wiring issue in starter switch signal circuit
- Corroded ignition switch connector
- Neutral safety switch issue affecting start signal
- PCM input circuit fault
Diagnostic steps
- Check starter switch signal on scan tool during cranking
- Inspect ignition switch connector
- Test starter switch circuit wiring for continuity
- Check neutral safety switch
- Verify PCM receives crank signal
Repair notes
Repair the ignition switch signal circuit or replace the ignition switch if faulty.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1