C0056high severityChassis
ABS Front Outlet Valve Solenoid Circuit
on 2005 Subaru Outback 3.0L H6 · AWD
What this code means
Malfunction in the front ABS outlet valve solenoid, which releases brake pressure during ABS activation.
Symptoms
- ABS light on
- Front brakes lock during ABS event
- Brake pedal hard during ABS activation
- Poor ABS performance
Common causes
- Outlet valve solenoid stuck
- ABS modulator internal failure
- Electrical fault in solenoid driver
- Contaminated brake fluid causing valve sticking
Diagnostic steps
- Test solenoid resistance at module connector
- Command valve with scan tool
- Check brake fluid condition
- Inspect module connector
- Check for related pump motor codes
Repair notes
Replace ABS hydraulic modulator if solenoid is faulty. Flush brake fluid.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic