P1507moderate severityPowertrain
Idle Control System Malfunction Fail Safe
on 2013 Subaru Outback 2.5L H4 · AWD
What this code means
The PCM has entered failsafe mode for the idle control system. The idle speed control cannot maintain target idle and has exceeded the correction range, triggering a failsafe idle speed that may be higher or lower than normal.
Symptoms
- Check Engine Light
- Idle speed fixed at failsafe value
- Rough or unstable idle
- Engine may stall
- Poor idle quality
Common causes
- Large vacuum leak
- Faulty idle air control valve
- Dirty throttle body restricting airflow
- Carbon buildup in IAC passages
- Intake manifold gasket leak
Diagnostic steps
- Perform smoke test for vacuum leaks
- Clean throttle body and IAC passages
- Test IAC valve operation
- Check intake manifold gaskets
- Monitor IAC duty cycle on scan tool
Repair notes
Locate and repair vacuum leaks; clean the throttle body and IAC system.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0011
Intake Camshaft Position Timing Over-Advanced Bank 1
P0012
Intake Camshaft Position Timing Over-Retarded Bank 1
P0013
Exhaust Camshaft Position Actuator Circuit/Open Bank 1
P0014
Exhaust Camshaft Position Timing Over-Advanced Bank 1
P0015
Exhaust Camshaft Position Timing Over-Retarded Bank 1