P1443low severityPowertrain
EVAP Vent Control Function Problem
on 2010 Subaru Tribeca 3.6L H6 · AWD
What this code means
The PCM has detected a functional problem with the EVAP canister vent control. The vent valve is not performing its intended function during the EVAP system leak check, preventing the system from sealing for the pressure test.
Symptoms
- Check Engine Light
- Failed emissions test
- EVAP monitor will not complete
- Possible fuel odor
Common causes
- Faulty canister vent control valve (stuck open)
- Vent valve wiring issue
- Blocked or damaged vent line
- Charcoal canister blockage
- Vent filter clogged with debris
Diagnostic steps
- Command vent valve closed with scan tool and check if system holds vacuum
- Test vent valve solenoid resistance
- Inspect vent line for blockage
- Check vent filter for debris
- Smoke test EVAP system
Repair notes
Replace the canister vent valve if it does not seal when commanded closed.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1