Free API
P0824moderate severityPowertrain

Gear Lever X-Position Circuit Range/Performance

on 2013 Subaru Tribeca 3.6L H6 · AWD

What this code means

The gear selector X-axis position signal is out of the expected range or not performing correctly. The module cannot reliably determine the selector position.

Symptoms

  • Shifting feels inconsistent
  • Transmission warning light on
  • Possible failure to engage a gear

Common causes

  • Worn or misadjusted gear lever sensor
  • Damaged wiring or connector
  • Mechanical binding in shifter assembly
  • Faulty transmission control module

Diagnostic steps

  1. Retrieve codes and review freeze frame data
  2. Check sensor output through full lever travel
  3. Inspect shifter mechanics and wiring harness
  4. Adjust, repair, or replace sensor as required

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2013 Subaru Tribeca repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Subaru Tribeca — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →