P2122critical severityPowertrain
Throttle/Pedal Position Sensor/Switch D Circuit Low
on 2018 Tesla Model 3 Long Range Dual Motor AWD · AWD
What this code means
Low voltage from accelerator pedal position sensor D.
Symptoms
- Limp mode
- Engine at idle
- Check engine light
Common causes
- Failed APP sensor
- Short to ground in wiring
- Corroded connector
Diagnostic steps
- Measure voltage at APP sensor D
- Check wiring
- Swap sensor if dual-assembly
Repair notes
Replace accelerator pedal assembly or repair wiring.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control