Free API
P2823high severityPowertrain

Pressure Control Solenoid 'H' Control Circuit High

on 2020 Tesla Model 3 Performance Dual Motor AWD · AWD

What this code means

The control circuit for pressure control solenoid H is reading high voltage. This points to an open circuit or short to power affecting transmission pressure control.

Symptoms

  • Rough or missed shifts
  • Transmission fault warning
  • Reduced performance

Common causes

  • Open circuit in solenoid H wiring
  • Short to power source
  • Failed pressure control solenoid H
  • Corroded or loose connector

Diagnostic steps

  1. Read transmission trouble codes
  2. Inspect solenoid H harness and connector
  3. Check circuit for open or short to power
  4. Test and replace solenoid if faulty

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2020 Tesla Model 3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Tesla Model 3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →