Free API
P2830high severityPowertrain

Pressure Control Solenoid 'I' Circuit

on 2020 Tesla Model 3 Performance Dual Motor AWD · AWD

What this code means

A general electrical fault has been detected in the pressure control solenoid I circuit. The transmission cannot properly regulate hydraulic pressure for this circuit.

Symptoms

  • Harsh shifting
  • Transmission slipping
  • Warning light illuminated

Common causes

  • Failed pressure control solenoid I
  • Wiring harness fault
  • Poor connector contact
  • Transmission control module issue

Diagnostic steps

  1. Scan for transmission codes
  2. Inspect solenoid I wiring and connector
  3. Test solenoid resistance
  4. Verify TCM output signal

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2020 Tesla Model 3 repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Tesla Model 3 — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →