P3062moderate severityPowertrain
Shift Quality - Harsh Downshift Detected
on 2020 Tesla Model 3 Standard Range Plus Single Motor RWD · RWD
What this code means
The TCM detected excessively harsh downshifts. The transition between gears during deceleration is abrupt.
Symptoms
- Check Engine Light
- Harsh downshifts
- Vehicle lurches on deceleration
- Engine braking feels excessive
- Driveline shudder on downshift
- Abrupt speed change during coast-down
Common causes
- Faulty shift timing solenoid
- Torque converter clutch not releasing
- Pressure control solenoid malfunction
- Valve body wear
- Incorrect TCM calibration
Diagnostic steps
- Monitor shift quality PIDs during deceleration
- Check TCC release timing
- Test pressure control solenoid
- Inspect shift solenoid operation
- Review TCM software version
Repair notes
Replace pressure control solenoid or valve body. TCM reflash may be available from manufacturer.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control