C0311moderate severityChassis
Air Suspension Compressor Overheating
on 2012 Tesla Model S 85 kWh Single Motor RWD · RWD
What this code means
The air suspension compressor has exceeded its maximum operating temperature.
Symptoms
- Suspension warning light
- Compressor shuts off
- Vehicle sags after extended operation
- Compressor runs excessively before shutting off
Common causes
- Air leak causing compressor to run too long
- Compressor worn internally
- Blocked intake filter
- High ambient temperature combined with heavy load
Diagnostic steps
- Check all air springs and lines for leaks using soapy water
- Inspect compressor intake filter
- Monitor compressor run time
- Check for leak codes at individual air springs
- Test compressor output volume
Repair notes
Find and repair air leaks first. Replace compressor if worn. Clean or replace intake filter.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Chassis codes on this vehicle
C0021
LF Wheel Speed Sensor Range/Performance
C0022
RF Wheel Speed Sensor Range/Performance
C0023
LR Wheel Speed Sensor Range/Performance
C0024
RR Wheel Speed Sensor Range/Performance
C0025
LF Wheel Speed Sensor Circuit Intermittent
C0026
RF Wheel Speed Sensor Circuit Intermittent
C0027
LR Wheel Speed Sensor Circuit Intermittent
C0028
RR Wheel Speed Sensor Circuit Intermittent
C0035
Left Front Wheel Speed Sensor Circuit
C0036
Left Front Wheel Speed Signal Erratic