Free API
P0967moderate severityPowertrain

Pressure Control Solenoid B Control Circuit Low

on 2012 Tesla Model S 85 kWh Single Motor RWD · RWD

What this code means

The transmission control module detected a low voltage condition in the pressure control solenoid B control circuit. This affects the ability to regulate hydraulic pressure for proper shifting.

Symptoms

  • Harsh or erratic shifting
  • Transmission slipping
  • Check engine light on

Common causes

  • Faulty pressure control solenoid B
  • Shorted or grounded wiring
  • Corroded connector
  • Failed transmission control module

Diagnostic steps

  1. Scan for related trouble codes
  2. Inspect solenoid connector and wiring
  3. Measure solenoid resistance and voltage
  4. Test or replace pressure control solenoid B

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2012 Tesla Model S repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Tesla Model S — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →