P3045critical severityPowertrain
DCT Hydraulic Pump Pressure Low
on 2012 Tesla Model S 85 kWh Single Motor RWD · RWD
What this code means
The DCT hydraulic pump is not generating sufficient pressure for clutch actuation and gear selection.
Symptoms
- Check Engine Light
- Slow gear changes
- Clutch slip during shifts
- No drive in any gear
- Transmission warning light
- Creep function loss in stop-and-go
Common causes
- Worn hydraulic pump
- Low hydraulic fluid level
- Internal seal leak
- Pressure accumulator failure
- Clogged hydraulic filter
Diagnostic steps
- Check hydraulic fluid level
- Read system pressure PID
- Test pump motor operation
- Inspect accumulator charge pressure
- Check for external fluid leaks
Repair notes
Replace hydraulic pump or repair internal leaks. Replace accumulator if pressure does not hold.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control