P3040critical severityPowertrain
Dual-Clutch Transmission Clutch A Overheated
on 2014 Tesla Model S P85D Dual Motor AWD · AWD
What this code means
The DCT control module detected excessive temperature on clutch A (odd gears). Clutch material is overheating, which can cause permanent damage.
Symptoms
- Check Engine Light
- Burning smell from transmission
- Transmission shudder in odd gears
- Reduced power mode
- Gear engagement delay
- Clutch slip in 1st/3rd/5th gears
Common causes
- Aggressive driving in stop-and-go traffic
- Clutch A wear beyond limit
- Insufficient clutch cooling
- TCM clutch adaptation out of range
- Towing beyond vehicle rating
Diagnostic steps
- Read clutch A temperature PID
- Check clutch adaptation values
- Inspect DCT fluid level and condition
- Review TCM clutch wear counter
- Test clutch cooling system flow
Repair notes
Allow clutch to cool before driving. If clutch wear limit is reached, clutch assembly replacement is required. Reset clutch adaptations after replacement.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0070
Ambient Air Temperature Sensor Circuit
P0071
Ambient Air Temperature Sensor Range/Performance
P0072
Ambient Air Temperature Sensor Circuit Low
P0073
Ambient Air Temperature Sensor Circuit High
P0115
Engine Coolant Temperature (ECT) Sensor 1 Circuit
P0116
ECT Sensor 1 Circuit Range/Performance
P0117
ECT Sensor 1 Circuit Low Input
P0118
ECT Sensor 1 Circuit High Input
P0119
ECT Sensor 1 Circuit Intermittent
P0125
Insufficient Coolant Temperature for Closed Loop Fuel Control