P0558high severityPowertrain
Brake Booster Pressure Sensor Circuit High
on 2016 Tesla Model S 75 kWh Dual Motor AWD · AWD
What this code means
The signal voltage from the brake booster pressure sensor is higher than the expected threshold. This usually indicates an open circuit or short to voltage.
Symptoms
- Brake warning light on
- Erratic brake assist
- Hard brake pedal
Common causes
- Open circuit in sensor wiring
- Short to voltage
- Faulty pressure sensor
- Poor ground connection
Diagnostic steps
- Read stored codes
- Measure sensor signal voltage
- Check for open or short to power
- Replace sensor if wiring is good
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0026
Intake Valve Control Solenoid Circuit Range/Performance Bank 1
P0027
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 1
P0028
Intake Valve Control Solenoid Circuit Range/Performance Bank 2
P0029
Exhaust Valve Control Solenoid Circuit Range/Performance Bank 2
P0033
Turbocharger/Supercharger Bypass Valve Control Circuit