body
Bumper Cover - Front
for 2016 Tesla Model X 100 kWh Dual Motor AWD · AWD
🎨What's included: replacement labor only — panel R&R plus the interior/exterior strip and refit it takes to get there. Refinish work (prime, paint, blend) is billed as a separate operation, per standard body labor guide practice.
🖌️Refinish for this panel: ~3 hr base/clear — billed as a separate operation from the replacement time above, per standard body-guide practice.
📡ADAS calibration required after this repair. This vehicle carries: front radar — dynamic calibration (Tesla Toolbox software and test drive procedure) · parking sonar — self calibration (Self-calibrates after installation). Budget it in the estimate — skipping calibration leaves safety systems un-aimed and the liability on the shop.
🔓 Step-by-step procedure: not written yet
For $3, we'll write the full Bumper Cover - Front procedure for the 2016 Tesla Model X — steps, torque values, tips — and it becomes free for every owner on earth, forever, with your name on it. Usually live within the hour.
Labor Hours
2hr
Range: 1.6–2.4 hr
Data quality
Book-style estimate
Not yet expert-verified. Have the book time? Correct it below — takes 30 seconds.
At $110/hr (independent shop)
$220
Estimated labor cost. Parts not included.