U0260low severityNetwork
Lost Communication With Sunroof Control Module
on 2024 Tesla Model X Plaid Tri Motor AWD · AWD
What this code means
The network has lost communication with the sunroof control module. Usually caused by wiring faults or a failed module.
Symptoms
- Sunroof inoperative
- Warning light on dash
- Sunroof stuck open or closed
Common causes
- Damaged wiring or connector at sunroof module
- Failed sunroof control module
- Blown fuse or power supply fault
- CAN bus network fault
Diagnostic steps
- Scan for communication trouble codes
- Verify power and ground to sunroof module
- Inspect wiring harness and connectors
- Test network communication lines
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Network codes on this vehicle
U0001
High Speed CAN Communication Bus
U0002
High Speed CAN Communication Bus Performance
U0003
High Speed CAN Communication Bus (+) Open
U0004
High Speed CAN Communication Bus (+) Low
U0005
High Speed CAN Communication Bus (+) High
U0006
High Speed CAN Communication Bus (-) Open
U0007
High Speed CAN Communication Bus (-) Low
U0008
High Speed CAN Communication Bus (-) High
U0009
High Speed CAN Communication Bus Shorted Together
U0010
Medium Speed CAN Communication Bus