B0640moderate severityBody
A/C Compressor Clutch Relay Circuit
on 1997 Toyota 4Runner 3.0L V6 · 4WD
What this code means
Malfunction in the A/C compressor clutch relay circuit. The relay controls engagement of the A/C compressor.
Symptoms
- A/C not blowing cold air
- Compressor clutch not engaging
- A/C works intermittently
- Relay clicking
Common causes
- Faulty A/C clutch relay
- Relay control circuit issue
- Low refrigerant triggering cutoff
- BCM or PCM relay driver failure
- Corroded relay socket
Diagnostic steps
- Check A/C clutch relay
- Test relay with jumper wire
- Check refrigerant pressure
- Test relay control signal from PCM/BCM
- Inspect relay socket for corrosion
Repair notes
Replace A/C clutch relay. If relay keeps failing, check compressor clutch current draw.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Body codes on this vehicle
B0001
Driver Frontal Stage 1 Deployment Control
B0001
Driver Frontal Stage 1 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0002
Driver Frontal Stage 2 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0003
Passenger Frontal Stage 1 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0004
Passenger Frontal Stage 2 Deployment Control
B0005
Driver Knee Airbag Deployment Circuit
B0005
Driver Knee Airbag Deployment Circuit