P1121high severityPowertrain
Accelerator Pedal Position Sensor Range/Performance
on 1997 Toyota 4Runner 3.0L V6 · RWD
What this code means
The APP sensor signal is outside expected range or not performing correctly.
Symptoms
- CEL
- Erratic throttle
- Surging
- Reduced power
Common causes
- Faulty APP sensor
- Intermittent connection
- Floor mat interference
- Faulty ECM
Diagnostic steps
- Monitor APP sensor live data
- Wiggle test connector
- Check pedal travel
- Test voltage range
Repair notes
Replace APP sensor.
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Bluetooth code reader (~$25)
Veepeak OBDCheck BLE →
Pairs with your phone — reads and clears codes, live data.
Serious DIY (~$100)
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
Shop-grade tablet (~$300+)
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
As an Amazon Associate, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1