Free API
3.5L V6FWDAUTOMATICgas2GR-FE
2 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0876moderate severityPowertrain

Transmission Fluid Pressure Sensor/Switch D Circuit Range/Performance

on 2012 Toyota Camry 3.5L V6 · FWD

What this code means

The transmission fluid pressure sensor D circuit reading is outside its normal range. This may cause improper shift and pressure control.

Symptoms

  • Delayed or harsh shifts
  • Transmission slipping
  • Warning light on

Common causes

  • Faulty pressure sensor
  • Low or dirty transmission fluid
  • Wiring or connector problems
  • Internal hydraulic fault

Diagnostic steps

  1. Check fluid level and condition
  2. Scan for stored codes
  3. Inspect wiring and connector
  4. Compare sensor signal to actual pressure

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2012 Toyota Camry repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Camry — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →