Free API
2.5L I4FWDAUTOMATICgas2AR-FE
2 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0081moderate severityPowertrain

Intake Valve Control Solenoid Circuit (Bank 2)

on 2016 Toyota Camry 2.5L I4 · FWD

What this code means

A fault is detected in the intake valve control solenoid circuit on bank 2. This solenoid manages variable intake valve timing on that bank.

Symptoms

  • Rough idle
  • Reduced power
  • Check engine light on

Common causes

  • Faulty intake valve control solenoid
  • Wiring open or short
  • Low or dirty oil
  • Failed PCM driver

Diagnostic steps

  1. Scan for VVT codes
  2. Check oil level and condition
  3. Test solenoid resistance
  4. Inspect wiring and connector

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2016 Toyota Camry repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Camry — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →