P0551low severityPowertrain
Power Steering Pressure Sensor Circuit Range/Performance
on 2018 Toyota Camry 2.5L I4 · FWD
What this code means
The power steering pressure sensor signal is outside its expected range. This sensor informs the PCM about steering load so it can adjust idle speed.
Symptoms
- Idle fluctuation when steering
- Check engine light on
- Rough idle at low speed
Common causes
- Faulty power steering pressure sensor
- Low or contaminated power steering fluid
- Wiring or connector fault
- Restricted power steering hose
Diagnostic steps
- Read sensor data with scan tool
- Compare signal to steering load
- Check fluid level and condition
- Inspect wiring and connector
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1