Free API
2.5L I4FWDAUTOMATICgasA25A-FKS
3 active safety recalls on this vehicle — view recalls
Founding sponsor spot is openYour name on every procedure for this vehicle, permanently.Sponsor — $99 →
P0724moderate severityPowertrain

Torque Converter/Brake Switch B Circuit High

on 2020 Toyota Camry 2.5L I4 · FWD

What this code means

The brake switch signal to the transmission controller reads high. The computer uses this input for torque converter unlock and cruise cancel.

Symptoms

  • Cruise control fault
  • Torque converter stays locked
  • Brake light concerns

Common causes

  • Faulty brake switch
  • Short to voltage in wiring
  • Corroded connector
  • Faulty TCM

Diagnostic steps

  1. Scan for codes and freeze frame
  2. Verify brake switch signal with scan tool
  3. Inspect wiring for short to voltage
  4. Replace brake switch if out of spec

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2020 Toyota Camry repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Camry — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →