P0719moderate severityPowertrain
Torque Converter/Brake Switch B Circuit Low
on 2024 Toyota Camry 2.5L I4 · FWD
What this code means
The brake switch signal to the transmission controller is reading low. This switch tells the system when the brakes are applied for torque converter and cruise operation.
Symptoms
- Torque converter won't unlock
- Cruise control won't disengage
- Harsh coast-down behavior
Common causes
- Faulty brake switch
- Short to ground in wiring
- Corroded connector
- Faulty TCM
Diagnostic steps
- Scan for codes and freeze frame
- Check brake switch operation with scan tool
- Inspect wiring for short to ground
- Replace brake switch if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1