P0470moderate severityPowertrain
Exhaust Pressure Sensor Malfunction
on 2019 Toyota Corolla 1.8L I4 · FWD
What this code means
The exhaust back pressure sensor is reading outside its expected range or has failed. This can affect EGR and turbo boost control on diesel and some gas engines.
Symptoms
- Check engine light on
- Reduced engine power
- Poor fuel economy
Common causes
- Faulty exhaust pressure sensor
- Clogged or damaged sensor pressure tube
- Wiring or connector corrosion
- Failed PCM input circuit
Diagnostic steps
- Scan and confirm code with freeze frame data
- Inspect sensor and pressure tube for clogs or leaks
- Check wiring and connector for damage
- Compare sensor reading to known good values, replace if faulty
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1