Free API
P0726moderate severityPowertrain

Engine Speed Input Circuit Range/Performance

on 2015 Toyota Highlander 2.7L I4 · FWD

What this code means

The engine speed signal at the transmission controller is present but out of the expected range. Shift and lockup timing depend on an accurate RPM value.

Symptoms

  • Poor shift quality
  • Torque converter shudder
  • Check engine light on

Common causes

  • Faulty engine speed sensor
  • Signal interference or noise
  • Wiring issue to TCM
  • Faulty PCM/TCM

Diagnostic steps

  1. Retrieve codes and freeze frame
  2. Compare RPM signal against actual engine speed
  3. Inspect wiring for damage or noise sources
  4. Replace sensor if reading is off

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2015 Toyota Highlander repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Highlander — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →