P0899moderate severityPowertrain
Transmission Control System MIL Request Circuit High
on 2000 Toyota MR2 1.8L I4 · RWD
What this code means
The transmission control module MIL request circuit is reading higher voltage than expected. This usually points to an open circuit or wiring fault between modules.
Symptoms
- MIL operation abnormal
- Transmission warning light
- Possible limp mode
Common causes
- Open or high resistance in MIL request circuit
- Faulty transmission control module
- Corroded or loose connectors
- PCM/TCM communication fault
Diagnostic steps
- Check MIL request circuit for opens or high resistance
- Inspect connectors for corrosion
- Verify communication between PCM and TCM
- Test module supply voltage and grounds
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0006
Fuel Shutoff Valve A Control Circuit Low
P0007
Fuel Shutoff Valve A Control Circuit High
P0008
Engine Position System Performance - Bank 1
P0009
Engine Position System Performance - Bank 2
P0010
Intake Camshaft Position Actuator Circuit/Open Bank 1