This procedure addresses a non-existent component on the 2019-2024 Toyota RAV4 2.5L I4, which uses Electric Power Steering (EPS) and does not have a hydraulic power steering pump or pulley.

Warnings

Tools required

Parts

• Not applicable - no power steering pump exists on this vehicle — N/A

Preparation

1. Verify that your vehicle actually requires this repair by confirming the presence of a hydraulic power steering pump
2. Consult the factory service manual for your specific VIN to confirm power steering system type
3. If experiencing steering problems on this EPS-equipped vehicle, perform electrical diagnostics on the EPS system instead

Procedure

1. 1

   Confirm Electric Power Steering Configuration
   Open the hood and verify that there is no hydraulic power steering pump mounted to the engine. The 2019-2024 RAV4 2.5L I4 FWD uses an electric motor mounted on the steering column or rack, with no belt-driven pump, pulley, or fluid reservoir. If a hydraulic pump is present, verify the vehicle year, model, and engine configuration, as this procedure is not applicable to the specified vehicle.
2. 2

   Identify Correct Repair Procedure
   For power steering concerns on this vehicle, reference Electric Power Steering (EPS) diagnostic and repair procedures instead. Common EPS components include the steering angle sensor, torque sensor, EPS control module, EPS motor, and wiring harness connections. No pulley, pump, or hydraulic components exist to service.

Reassembly

1. This procedure does not apply to the 2019-2024 Toyota RAV4 2.5L I4 FWD with Electric Power Steering

Verification

• Confirm your vehicle's power steering system type before attempting any repairs
• Consult a Toyota dealer or the factory service manual if uncertain about your vehicle's steering system configuration

More procedures for this vehicle