Free API
P0801moderate severityPowertrain

Reverse Inhibit Control Circuit

on 2004 Toyota Sienna 3.3L V6 · AWD

What this code means

A fault has been detected in the reverse inhibit control circuit, which prevents accidental engagement of reverse gear. This can affect the ability to select or lock out reverse.

Symptoms

  • Difficulty engaging reverse
  • Check engine light on
  • Reverse lockout not functioning

Common causes

  • Faulty reverse inhibit solenoid
  • Open or short in control circuit wiring
  • Damaged connector at transmission
  • Faulty transmission control module

Diagnostic steps

  1. Scan and record freeze frame data
  2. Inspect reverse inhibit circuit wiring and connectors
  3. Test solenoid resistance against spec
  4. Check TCM output command and power supply

Other Powertrain codes on this vehicle

🔧 Database maintained under the daily editorial review of Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 2004 Toyota Sienna repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Sienna — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
Manage repairs, estimates, and customers with ShopBase — $249/mo, all features included.
Try ShopBase →