Free API
P2830high severityPowertrain

Pressure Control Solenoid 'I' Circuit

on 1997 Toyota Tacoma 2.4L I4 · RWD

What this code means

A general electrical fault has been detected in the pressure control solenoid I circuit. The transmission cannot properly regulate hydraulic pressure for this circuit.

Symptoms

  • Harsh shifting
  • Transmission slipping
  • Warning light illuminated

Common causes

  • Failed pressure control solenoid I
  • Wiring harness fault
  • Poor connector contact
  • Transmission control module issue

Diagnostic steps

  1. Scan for transmission codes
  2. Inspect solenoid I wiring and connector
  3. Test solenoid resistance
  4. Verify TCM output signal

Other Powertrain codes on this vehicle

For shop owners
Diagnosing for customers?
Text them the estimate with photos and get approval in minutes with Auto Shop Base.
Talk to the ownerSee what's included
Built by a shop owner. Talk to Chris, not a sales rep.
🔧 Built by master technician Chris Hackleman · Master Technician · 20+ years. Spot an error? Use the Help link above — a human reads every report.
Stuck on this repair? Take it to The Diag Desk — ask a master tech about this exact car → real human answer within 24h, never AI
⚠ STILL BEHIND THE PAYWALL
The 1997 Toyota Tacoma repair data is incomplete because no one has sponsored it yet. For $99, we generate the full step-by-step procedures, then fact-check them with a second AI pass and your expert review. Your name on every procedure, permanently.
The same data would cost $169/mo from Mitchell1 or $30/year from ALLDATAdiy — and you'd be renting access, not freeing it. Sponsor once, free forever.
Sponsor the Toyota Tacoma — $99 →
Building an app?
Free API access to all this data — 10 requests/day, no card required.
Get an API key →
Run a shop?
A free website, SEO and Google reviews with your shop software. Auto Shop Base Professional, $250/mo, with our labor times on every estimate.
See what's included →