P0436low severityPowertrain
Catalyst Temperature Sensor Range/Performance (Bank 2)
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
The bank 2 catalyst temperature sensor reading is out of the normal range for operating conditions. The signal is present but not accurate.
Symptoms
- Check engine light on
- Possible failed emissions test
- No obvious drivability change
Common causes
- Faulty catalyst temperature sensor
- Wiring resistance or corrosion
- Exhaust leak near sensor
- Bad PCM
Diagnostic steps
- Read code and compare live data
- Inspect sensor and connector on bank 2
- Check for exhaust leaks near sensor
- Replace sensor if readings stay off
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open