P0801moderate severityPowertrain
Reverse Inhibit Control Circuit
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
A fault has been detected in the reverse inhibit control circuit, which prevents accidental engagement of reverse gear. This can affect the ability to select or lock out reverse.
Symptoms
- Difficulty engaging reverse
- Check engine light on
- Reverse lockout not functioning
Common causes
- Faulty reverse inhibit solenoid
- Open or short in control circuit wiring
- Damaged connector at transmission
- Faulty transmission control module
Diagnostic steps
- Scan and record freeze frame data
- Inspect reverse inhibit circuit wiring and connectors
- Test solenoid resistance against spec
- Check TCM output command and power supply
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open