P0857moderate severityPowertrain
Traction Control Input Signal Range/Performance
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
The PCM receives a traction control input signal that is out of the expected range or performance limits. This may cause traction and stability systems to behave incorrectly.
Symptoms
- Traction control warning light
- Stability control disabled
- Intermittent engine power loss
Common causes
- Faulty wheel speed or traction sensor
- CAN signal noise or interference
- Failed traction control module
- Wiring or connector fault
Diagnostic steps
- Scan PCM and ABS for codes
- Review data stream for signal range
- Inspect wiring and sensor connectors
- Replace faulty sensor or module
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open