P0875moderate severityPowertrain
Transmission Fluid Pressure Sensor/Switch D Circuit
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
A general fault has been detected in the transmission fluid pressure sensor or switch D circuit. This affects the ability to monitor hydraulic pressure accurately.
Symptoms
- Erratic shifting
- Check engine light on
- Reduced transmission performance
Common causes
- Faulty pressure sensor
- Wiring or connector fault
- Low transmission fluid
- Internal valve body issue
Diagnostic steps
- Check transmission fluid level
- Scan for related codes
- Inspect sensor wiring and connector
- Test sensor signal output
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open