P0877moderate severityPowertrain
Transmission Fluid Pressure Sensor/Switch D Circuit Low
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
The transmission fluid pressure sensor D circuit is reporting a voltage that is too low. This can indicate a short circuit or an actual pressure loss.
Symptoms
- Transmission slipping
- Delayed engagement
- Fault light illuminated
Common causes
- Low transmission fluid
- Short to ground in wiring
- Failed pressure sensor
- Internal pump or seal leak
Diagnostic steps
- Verify fluid level
- Check circuit for short to ground
- Measure sensor voltage
- Perform hydraulic pressure test
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open