P0932high severityPowertrain
Hydraulic Pressure Sensor Circuit
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
A general fault was detected in the transmission hydraulic pressure sensor circuit. This affects the PCM's ability to monitor and control line pressure.
Symptoms
- Harsh or erratic shifting
- Transmission slipping
- Transmission warning light
Common causes
- Faulty hydraulic pressure sensor
- Wiring or connector fault
- Low transmission fluid pressure
- PCM/TCM circuit fault
Diagnostic steps
- Scan for codes and freeze frame data
- Inspect pressure sensor wiring and connector
- Compare sensor reading to actual line pressure
- Replace sensor if reading is inaccurate
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open