P0952moderate severityPowertrain
Auto Shift Manual Control Circuit Low
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
The automatic shift manual control circuit is showing a lower than expected voltage signal. This points to a short to ground or an open in the manual shift control wiring.
Symptoms
- Manual shift mode fails to engage
- Transmission stuck in automatic mode
- Warning light illuminated
Common causes
- Short to ground in shift circuit wiring
- Faulty shift selector switch
- Corroded connector pins
- Failed transmission control module
Diagnostic steps
- Scan for stored transmission codes
- Measure circuit voltage at the connector
- Inspect wiring for shorts to ground
- Test shift switch resistance values
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open