P0975moderate severityPowertrain
Shift Solenoid B Control Circuit Range/Performance
on 1998 Toyota Tacoma 2.7L I4 · RWD
What this code means
The PCM detected that the shift solenoid B control circuit is not responding as expected. This usually points to a wiring or solenoid problem affecting shifting.
Symptoms
- Harsh or delayed shifts
- Transmission stuck in gear
- Check engine light on
Common causes
- Faulty shift solenoid B
- Damaged or corroded wiring
- Poor electrical connection
- Failed PCM/TCM driver
Diagnostic steps
- Scan and record freeze frame data
- Inspect solenoid connector and wiring
- Measure solenoid resistance and compare to spec
- Test control circuit for voltage/ground
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open