P0983moderate severityPowertrain
Shift Solenoid D Control Circuit Low
on 1999 Toyota Tacoma 2.7L I4 · RWD
What this code means
The PCM detected a low voltage condition in the control circuit for shift solenoid D. This can prevent proper gear engagement or cause harsh shifts.
Symptoms
- Harsh or delayed shifts
- Transmission stuck in gear
- Check engine light on
Common causes
- Faulty shift solenoid D
- Wiring short to ground
- Corroded connector
- Faulty PCM/TCM
Diagnostic steps
- Scan for related transmission codes
- Check solenoid D wiring for shorts to ground
- Measure solenoid resistance
- Test control circuit voltage from PCM
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open