P0714moderate severityPowertrain
Transmission Fluid Temperature Sensor Circuit Intermittent
on 2003 Toyota Tacoma 2.7L I4 · RWD
What this code means
The transmission fluid temperature sensor signal is cutting in and out. This affects shift timing and torque converter operation.
Symptoms
- Erratic shifting
- Torque converter lockup issues
- Transmission overheating warnings
Common causes
- Loose or corroded sensor connector
- Intermittent wiring fault
- Failing fluid temp sensor
- Faulty TCM
Diagnostic steps
- Scan codes and review freeze frame
- Wiggle-test sensor wiring while monitoring temp reading
- Inspect connector for corrosion
- Replace temp sensor if signal drops out
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open