P0745high severityPowertrain
Pressure Control Solenoid A Malfunction
on 2003 Toyota Tacoma 2.7L I4 · RWD
What this code means
The PCM detects a general fault in pressure control solenoid A, which regulates transmission line pressure. Incorrect line pressure leads to poor shift quality and possible clutch damage.
Symptoms
- Harsh or slipping shifts
- Delayed engagement
- Transmission overheating
Common causes
- Faulty pressure control solenoid
- Low transmission fluid level
- Damaged solenoid wiring or connector
- Faulty transmission control module
Diagnostic steps
- Scan for stored transmission codes
- Check transmission fluid level and condition
- Inspect solenoid circuit wiring
- Test solenoid resistance and command operation
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open