P0828moderate severityPowertrain
Up and Down Shift Switch Circuit High
on 2003 Toyota Tacoma 2.7L I4 · RWD
What this code means
The signal from the manual up/down shift switch circuit is reading higher than expected. This often indicates an open circuit or short to voltage.
Symptoms
- Manual shift mode inoperative
- Transmission warning light on
- Erratic shift behavior
Common causes
- Open circuit in switch wiring
- Short to voltage in circuit
- Faulty up/down shift switch
- Faulty transmission control module
Diagnostic steps
- Read stored codes and freeze frame data
- Measure switch circuit signal voltage
- Inspect wiring for opens or shorts to power
- Replace switch or repair wiring as needed
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open