P0960high severityPowertrain
Pressure Control Solenoid "A" Control Circuit/Open
on 2003 Toyota Tacoma 2.7L I4 · RWD
What this code means
The transmission pressure control solenoid A circuit is open or has lost continuity. This prevents proper hydraulic pressure regulation inside the transmission.
Symptoms
- Harsh or erratic shifting
- Transmission slipping
- Check engine light on
Common causes
- Faulty pressure control solenoid
- Open or broken wiring to solenoid
- Corroded connector at transmission
- Faulty TCM/PCM
Diagnostic steps
- Scan for stored transmission codes
- Inspect solenoid connector and harness
- Measure solenoid resistance and circuit continuity
- Replace solenoid if out of spec
🔌 Don't have a code reader?
Any of these will read and clear this code — pick by how deep you want to go.
Budget handheld~$40
ANCEL AD410 →
No-phone-needed handheld — reads, clears, live data, freeze frame.
✓ ANCEL official store
Serious DIY~$100
BlueDriver Pro →
Enhanced codes (ABS, airbag, TPMS) plus repair reports.
SHOP FAVORITEShop-grade tablet~$300
Autel MaxiCOM MK808S →
Bidirectional tests, service resets, all systems.
✓ Autel official store
Pro diagnostics$1,500+
Autel MaxiSys MS906 Pro →
Full-system pro platform — topology mapping, ECU coding, the works.
✓ Autel official store
As an Amazon Associate and Autel/ANCEL partner, OLP earns from qualifying purchases — how we link. This never changes the specs we publish.
Other Powertrain codes on this vehicle
P0001
Fuel Volume Regulator Control Circuit/Open
P0001
Fuel Volume Regulator Control Circuit/Open
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0002
Fuel Volume Regulator Control Circuit Range/Performance
P0003
Fuel Volume Regulator Control Circuit Low
P0003
Fuel Volume Regulator Control Circuit Low
P0004
Fuel Volume Regulator Control Circuit High
P0004
Fuel Volume Regulator Control Circuit High
P0005
Fuel Shutoff Valve A Control Circuit/Open
P0005
Fuel Shutoff Valve A Control Circuit/Open